It can be cut, drilled and nailed using standard woodworking tools. This plastic lumber is easy to work with. Graffiti from paint can be removed with commercial solvent and vandal carvings can be smoothed with simple household tools. Made with 100 % recycled plastic, the molded-in color feature means no painting is ever required. This recycled plastic lumber is not recommended or intended for general fencing applications.jects. This high quality, dimensional lumber can be used in a wide range of non-structural environments such as boardwalks, garden landscape design, decks, and various commercial as well as industrial manufacturing applications. This means a 2×8 actual size is 1 1/2 inches in its thickness by 7 1/4 inches.2" x 6" x 12' (nominal) Recycled Plastic Rectangular Lumber (26144) The larger 2x boards (2×10, 2×8, etc.) lost 3/4 inches of their width. This means a 2×4 board is actually 3-1/2 inches by 1-1/2 inches. ![]() 2x Board SizesĢ×6 and 2×8 boards lost 1/2 inches in thickness and 1/2 inches in its width just prior to leaving the mill. This means a 1×10 is actual 3/4 inches in its thickness by 9 1/4 inches. The larger 1x boards (1×10, 1×8, etc.) lose 3/4 inches in their width. Modern sawmills mostly account for this, and dimensional lumber is generally quite consistent.ġ×6 and 1×4 boards lose 1/4 inch in thickness and 1/2 inch in their width prior to leaving the mill which means a 1×4 board is actually 3 1/2 inches by 3/4 inches. ![]() These days, boards are deliberately cut into large in order to allow the shrinkage while the milling procedure and kiln drying.Īs the amount of a board that shrinks may vary by moisture content, wood species, and the individual tree, so the final size may also vary slightly. In history, the softwood logs were cut into 2 x 8, but they naturally shrink as boards dry, and after milling and planing, they end up on 1.5×7.25. Why dimensional lumber is smaller as compared to nominal dimensions? If the nominal size is more than 2″ and less than 8,” then the actual size of the board will be 1/2″ inches smaller as compared to the nominal size.If the nominal size is equal to 8” or larger than this, then its actual size will be 3/4” inches smaller. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |